Supplies Needed
Tube of choice: The tube I am using is from a pack called Grunge Chick and can be purchased here.
The scrapkit I am using is called Grunge Love and can be purchased here.
Mask by Wee Scots Lass Creations: WSL_Mask117 which can be found here.
Font I used is Black Chancery again.
Plugins needed
Eye Candy 4000: Glass Preset
Okay now let's get started.
Go ahead and put the mask in your Jasc Paint shop pro masks folder and open up Paint shop pro.
We will start with a new image 600x600, transparent.
Now you can use a paper of your choice but I used BNB-paper-5 opened that one up. Go to my image and go to selections, select all. Go to your paper and go up to edit, copy. Go back to your new image and edit, paste into selection. Close out your paper image.
Now we will go up to layers, Load/Save Mask and Load mask from disk. Make sure source luminance is checked, Fit to canvas is checked, and hide all masks is checked, Invert transparency is not checked. Click on Load. Right click on the layer in the layer pallette, Click on Merge, and Merge Group. Rename that Layer Mask.
Open up BNB-frame-2 and go to edit, copy. Close it out and go to your image and click on edit paste as new layer. Rename that layer Frame. Go to image, resize 90 percent and make sure Resize all layers is not checked. Click on okay.
Open up your tube of choice. If you use the same one I use it is BNB-GC-6. Go up to edit, copy and close out the original. Go to your image and click on edit paste as new layer. You may need to resize the image and if that is the case go up to Image, Resize and if you use the same tube resize at 25 percent. Make sure resize all layers is not checked. Click on okay. Position your tube to the side using my tag for an example and apply a drop shadow to the tube. Rename the Layer tube.
Now open up the BNB-wordart-1 and click on edit copy and close out the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Make sure resize all layers are not checked. Click on okay. Position the word using my tag as a sample and rename layer to Love.
Now open up the BNB-wordart-3 and click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Make sure resize all layers are not checked. Click on okay. Position the word using my tag as a sample and rename layer to hurts. Move that layer up under Love in the layer palette.
Select the frame layer and open up BNB-dangles. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Position the dangles using my tag as a guide. The ribbon will go over the top of it to hide some of it so that is fine if it goes on the frame some. Rename that layer dangles.
Now open up BNB-scrunch-ribbon-1. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Position the ribbon at the top of the frame using my tag as a guide. Rename that layer Ribbon1
Open up BNB-rose-1. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, Rotate, Free rotate click on right, and free and put in 90 making sure all layers and rotate single layer around canvas are not checked. and click Ok.
Go to image, resize and resize it at 60 percent. Position the rose at the bottom right using my tag as a guide. Now this next part you need to click on your erase tool. Make your size at 10 and Erase the leaf and the stem that holds the leaf. Rename that layer rose 1. Go up to layer duplicate. Go to Image, Mirror. Move the left rose to meet the stem in the middle of the frame. Rename that layer Rose 2.
Open up BNB-ribbon. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. resize at 35 percent. Position the ribbon at the bottom to hide the rose stems. Rename Layer Ribbon 2.
Open up BNB-brad-1. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. Resize at 25 percent. Position the brad to the left bottom to hide the ribbon start. Use my tag as a guide for placement. Go up to layers duplicate. Move the duplicate to the other side to match my tag position. Rename that layer brad 2 and the layer under it brad 1.
Open up BNB-pin-3. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. Resize at 40 percent. Position pin to the left as shown. Click on your eraser tool and erase part of the pin. Now add a drop Shadow. Rename layer to pin.
Open up BNB-charm. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. Resize at 40 percent. Position the charm to the left as show on the tag. Click on your eraser tool. Set size to 5 and erase part of the loop on the charm. Rename layer to charm.
Please remember to add all copyrights. Also add your name in the font you choose and save as either a .Jpeg or PNG.
Resize and crop the image to fit your needs. And there you have it. I hope you find this easy to follow. I have fun making these tutorials.
Tube of choice: The tube I am using is from a pack called Grunge Chick and can be purchased here.
The scrapkit I am using is called Grunge Love and can be purchased here.
Mask by Wee Scots Lass Creations: WSL_Mask117 which can be found here.
Font I used is Black Chancery again.
Plugins needed
Eye Candy 4000: Glass Preset
Okay now let's get started.
Go ahead and put the mask in your Jasc Paint shop pro masks folder and open up Paint shop pro.
We will start with a new image 600x600, transparent.
Now you can use a paper of your choice but I used BNB-paper-5 opened that one up. Go to my image and go to selections, select all. Go to your paper and go up to edit, copy. Go back to your new image and edit, paste into selection. Close out your paper image.
Now we will go up to layers, Load/Save Mask and Load mask from disk. Make sure source luminance is checked, Fit to canvas is checked, and hide all masks is checked, Invert transparency is not checked. Click on Load. Right click on the layer in the layer pallette, Click on Merge, and Merge Group. Rename that Layer Mask.
Open up BNB-frame-2 and go to edit, copy. Close it out and go to your image and click on edit paste as new layer. Rename that layer Frame. Go to image, resize 90 percent and make sure Resize all layers is not checked. Click on okay.
Open up your tube of choice. If you use the same one I use it is BNB-GC-6. Go up to edit, copy and close out the original. Go to your image and click on edit paste as new layer. You may need to resize the image and if that is the case go up to Image, Resize and if you use the same tube resize at 25 percent. Make sure resize all layers is not checked. Click on okay. Position your tube to the side using my tag for an example and apply a drop shadow to the tube. Rename the Layer tube.
Now open up the BNB-wordart-1 and click on edit copy and close out the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Make sure resize all layers are not checked. Click on okay. Position the word using my tag as a sample and rename layer to Love.
Now open up the BNB-wordart-3 and click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Make sure resize all layers are not checked. Click on okay. Position the word using my tag as a sample and rename layer to hurts. Move that layer up under Love in the layer palette.
Select the frame layer and open up BNB-dangles. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Position the dangles using my tag as a guide. The ribbon will go over the top of it to hide some of it so that is fine if it goes on the frame some. Rename that layer dangles.
Now open up BNB-scrunch-ribbon-1. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize and resize it at 50 percent. Position the ribbon at the top of the frame using my tag as a guide. Rename that layer Ribbon1
Open up BNB-rose-1. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, Rotate, Free rotate click on right, and free and put in 90 making sure all layers and rotate single layer around canvas are not checked. and click Ok.
Go to image, resize and resize it at 60 percent. Position the rose at the bottom right using my tag as a guide. Now this next part you need to click on your erase tool. Make your size at 10 and Erase the leaf and the stem that holds the leaf. Rename that layer rose 1. Go up to layer duplicate. Go to Image, Mirror. Move the left rose to meet the stem in the middle of the frame. Rename that layer Rose 2.
Open up BNB-ribbon. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. resize at 35 percent. Position the ribbon at the bottom to hide the rose stems. Rename Layer Ribbon 2.
Open up BNB-brad-1. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. Resize at 25 percent. Position the brad to the left bottom to hide the ribbon start. Use my tag as a guide for placement. Go up to layers duplicate. Move the duplicate to the other side to match my tag position. Rename that layer brad 2 and the layer under it brad 1.
Open up BNB-pin-3. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. Resize at 40 percent. Position pin to the left as shown. Click on your eraser tool and erase part of the pin. Now add a drop Shadow. Rename layer to pin.
Open up BNB-charm. Click on edit, copy and close out of the original. Go to your image and click on edit, paste as new layer. Go to image, resize. Resize at 40 percent. Position the charm to the left as show on the tag. Click on your eraser tool. Set size to 5 and erase part of the loop on the charm. Rename layer to charm.
Please remember to add all copyrights. Also add your name in the font you choose and save as either a .Jpeg or PNG.
Resize and crop the image to fit your needs. And there you have it. I hope you find this easy to follow. I have fun making these tutorials.
0 comments:
Post a Comment